Call 954-792-2818

Accessories

40 Item(s)

  • 24VAC Camera Power Supply 16 Channels

    Sku: EX24V16

    Our EX24V16 is a dependable 16 output, 8 Amp, 24VAC camera power supply. It features 16 outputs, each with its own auto-reset fuse so you don't ever need to carry spare fuses again.

  • BNC Video Surge Protector

    Sku: EXPR100BNC

    BNC Video Surge Protector protects CCTV equipment from high voltage surges on coaxial cable. Two stage protection provides 4KV maximum surge protection with 1 ns surge protection attack time.

  • CAT5 Video Surge Protector

    Sku: EXPR100CAT5

    CAT5 Video Surge Protector protects CCTV equipment from high voltage surges on CAT5 cable. Two stage protection provides 4KV maximum surge protection with 1 ns surge protection attack time.

  • Video Amplifier (BNC) - 1 Input 2 Outputs

    Sku: EXMP2

    Video Distribution Amplifier (BNC) - 1 Input 2 Outputs. Takes 1 BNC video input and distributes to 2 BNC video outputs. 1V p-p at 75 ohms. Requires 12 VDC power.

  • 24 VAC Camera Power Supply 24 Channels

    Sku: EX24V24

    24VAC power supply , 24 channels with auto resetting fuses.

  • Ground Loop Isolator

    Sku: GLO100

    Eliminate video distortion and noise on RG59 video cable with our GLO100 ground loop isolator. BNC male & female connectors. Can be used at the camera or at the DVR. No power required.

  • POE800-70W 8 Channel PoE Switch

    Sku: POE800-70W

    The POE800-70W 8 channel PoE switch matches up perfectly with Innotech's entire line of fixed IP cameras and NVR's. This switch delivers a maximum of 30W per channel and a 66W budget. Network speeds up to 100Mbps with space saving desktop footprint.

  • POE1600-130W 16 Channel PoE Switch

    Sku: POE1600-130W

    The POE1600-130W 16 channel PoE switch matches up perfectly with Innotech's entire line of fixed IP cameras and NVRs. This switch delivers a maximum of 30W per channel, with a 123W budget. Network speeds up to 100Mbps and rack mountable with included rack mount brackets. Easy to monitor via LED's for PoE, Power and LInk Activity.

  • POE2400 24 Channel PoE Switch

    Sku: POE2400

    The POE2400 24 channel PoE switch matches up perfectly with Innotech's entire line of fixed IP cameras and NVRs. This switch delivers up to 15.4W per channel with a maximum of 170W. Network speeds up to 100Mbps and rack mountable with included rack mount brackets. Easy to monitor via LED's for PoE, Power and LInk Activity.

  • 16 CH Active Video Balun Receiver - Up to 4,500 ft.

    Sku: EXBU116RX

    16 CH Active Video Balun Receiver

    Transmit video up to 4,500 ft. over CAT5

  • 8 CH Active Video Balun Receiver - Up to 4,500 ft.

    Sku: EXBU108RX

    8 CH Active Video Balun Receiver

    Transmit video up to 4,500 ft. over CAT5

  • Video Balun - Up to 3,000 ft.

    Sku: EXBU100V

    1 CH Passive Video Balun

    • Transmit video up to 3,000 ft. over CAT5

  • 4 Channel Network Video Encoder

    Sku: EXNVS04

    Bring up to four of your existing legacy analog cameras into the IP world at up to 30 FPS D1 resolution with Innotech's EXNVS04 Network Video Encoder. Works with any analog cameras, even PTZ's. Features integrated web server, 2-way audio, RS-485 for PTZ control and contains a built in SD card slot for local recording.

  • 24VAC Camera Power Supply 9 Channels

    Sku: EX24V9

    Our EX24V9 is a dependable 9 output, 4 Amp, 24VAC camera power supply. It features 9 outputs, each with its own auto-reset fuse so you don't ever need to carry spare fuses again.

  • 24VAC Camera Power Supply 4 Channels

    Sku: EX24V4

    Our EX24V4 is a dependable 4 output, 4 Amp, 24VAC camera power supply. It features 4 outputs, each with its own auto-reset fuse so you don't ever need to carry spare fuses again.

  • 4 Channel SmartControl® CAT5 Decoder Kit

    Sku: EX400L-KIT

    Innotech's 4 Channel SmartControl® CAT5 Decoder Kit provides camera power, video & OSD control - all over a single CAT5 cable with standard RJ45 plugs, up to 1,000 feet. Works with any of our SmartControl® CAT5 - 215, 233, 234 and 235 series cameras - and with any analog DVR or Hybrid DVR. Designed, engineered, assembled and tested in the USA.

  • 1 CH Audio Balun - Up to 3,000 ft.

    Sku: EXBU100A

    1 CH Audio Balun

    Transmit audio up to 3,000 ft. over CAT5

  • 1 CH Active Video Balun Transmitter - Up to 4,500 ft.

    Sku: EXBU101TX

    1 CH Active Video Balun Transmitter

    Transmit video up to 4,500 ft. over CAT5

  • 1 CH Active Video Balun Receiver - Up to 4,500 ft.

    Sku: EXBU101RX

    1 CH Active Video Balun Receiver

    Transmit video up to 4,500 ft. over CAT5

  • 24VAC Power Supply for SmartControl® CAT5 Decoders

    Sku: EX24V3AC

    24VAC Power Supply for SmartControl® CAT5 Decoders. Provides power for up to (4) EX400L Series SmartControl® CAT5 Decoders (Up to 16 SmartControl® CAT5 Cameras), or (1) EX400HP SmartControl® CAT5 PTZ Decoder (Up to 4 SmartControl® CAT5 PTZ's). Provides 3000mA (72W) of power at 24VAC. UL listed & Weather Resistant.

  • 8 Channel SmartControl® CAT5 Decoder Kit

    Sku: EX800L-KIT

    Innotech's 8 Channel SmartControl® CAT5 Decoder Kit provides camera power, video & OSD control - all over a single CAT5 cable with standard RJ45 plugs, up to 1,000 feet. Works with any of our SmartControl® CAT5 - 215, 233, 234 and 235 series cameras - and with any analog DVR or Hybrid DVR. Designed, engineered, assembled and tested in the USA.

  • 12 Channel SmartControl® CAT5 Decoder Kit

    Sku: EX1200L-KIT

    Innotech's 12 Channel SmartControl® CAT5 Decoder Kit provides camera power, video & OSD control - all over a single CAT5 cable with standard RJ45 plugs, up to 1,000 feet. Works with any of our SmartControl® CAT5 - 215, 233, 234 and 235 series cameras - and with any analog DVR or Hybrid DVR. Designed, engineered, assembled and tested in the USA.

  • 16 Channel SmartControl® CAT5 Decoder Kit

    Sku: EX1600L-KIT

    Innotech's 16 Channel SmartControl® CAT5 Decoder Kit provides camera power, video & OSD control - all over a single CAT5 cable with standard RJ45 plugs, up to 1,000 feet. Works with any of our SmartControl® CAT5 - 215, 233, 234 and 235 series cameras - and with any analog DVR or Hybrid DVR. Designed, engineered, assembled and tested in the USA.

  • 24 Channel SmartControl® CAT5 Decoder Kit

    Sku: EX2400L-KIT

    Innotech's 24 channel SmartControl® CAT5 Decoder Kit provides camera power, video & OSD control - all over a single CAT5 cable with standard RJ45 plugs, up to 1,000 feet. Works with any of our SmartControl® CAT5 - 215, 233, 234 and 235 series cameras - and with any analog DVR or Hybrid DVR. Designed, engineered, assembled and tested in the USA.

  • 8 Channel SmartControl® CAT5 Decoder / Metal Enclosure

    Sku: EX800LIR

    Innotech's 8 Channel SmartControl® CAT5 Decoder provides camera power, video & OSD control - all over a single CAT5 cable with standard RJ45 plugs, up to 1,000 feet. Works with any of our SmartControl® CAT5 - 215 series, 233 series, 234 series and 235 series cameras - and with any DVR or Hybrid DVR. Standardize all your camera wiring on the CAT5 backbone and future-proof your infrastructure with SmartControl® CAT5.

  • 12 Channel SmartControl® CAT5 Decoder / Metal Enclosure

    Sku: EX1200LIR

    Innotech's EX1200LIR 12 Channel SmartControl® CAT5 Decoder provides camera power, video & OSD control over a single CAT5 cable, up to 1,000 feet. Compatible with our Smartcontrol® CAT5  215/233/234/235 series cameras and any DVR or Hybrid DVR.

  • 16 Channel SmartControl® CAT5 Decoder / Metal Enclosure

    Sku: EX1600LIR

    Innotech's 16 Channel SmartControl® decoder provides power, video & OSD control over a single CAT5 cable, up to 1,000 feet. Compatible with our SmartControl® CAT5 215/233/234/235 CAT5 series cameras and any DVR. Standardize all your camera wiring on the CAT5 backbone and future-proof your infrastructure with SmartControl® CAT5.

  • 24 Channel SmartControl® CAT5 Decoder / Metal Enclosure

    Sku: EX2400LIR

    Innotech's 24 Channel SmartControl® CAT5 Decoder provides camera power, video & OSD control over a single CAT5 cable, up to 1,000 feet. Compatible with our SmartControl® CAT5 215/233/234/235 series cameras and any DVR or Hybrid DVR.

  • 4 Channel SmartControl® CAT5 Decoder

    Sku: EX400L

    Our CAT5 decoders provide video, power, OSD and even PTZ control to our SmartControl© CAT5 cameras, all over a single standard CAT5 cable - up to 1,000 ft. - and it works with any DVR or any Hybrid DVR (BNC).

  • Wired OSD Remote Control for SmartControl® CAT5 Cameras

    Sku: EXCO200

    Wired OSD Controller for SmartControl® CAT5 Cameras. Works with all SmartControl® CAT5 Decoders (except EX1600ACRK). Now you can make all of your OSD adjustments from the head end on the DVR main monitor. Another exclusive feature, only from Innotech!

  • SmartControl® CAT5 Extender

    Sku: EX04HUB

    Need a CAT5 run of more than 1,000 feet to your Innotech SmartControl® CAT5 camera? No problem! Just use our SmartControl® CAT5 EXO4HUB to extend the camera distance up to 2,200 feet for up to (4) SmartControl® CAT5 cameras.

  • BNC to SmartControl® CAT5 Converter 12 VDC

    Sku: EX100

    Easily connect 12 VDC cameras to your SmartControl® CAT5 system with the EX100 BNC to SmartControl® CAT5 Converter. Future proof your infrastructure with SmartControl® CAT5 and make use of your existing 12 VDC cameras.

  • 16 Channel SmartControl® Rack Mount Decoder

    Sku: EX1600ACRK

    Our EX1600ACRK 16 Channel SmartControl® CAT5 Rack Mound Decoder provides video, power and optional OSD control to up to 16 of our SmartControl® CAT5 cameras, all over a single standard CAT5 cable for each camera - up to 1,000 ft. - and it works with any DVR or any Hybrid DVR with analog BNC video inputs. Ultra slim 1U design requires minimal rack space and is UL listed. No more video baluns, no more camera power supplies, no more siamese cable. Future proof your infrastructure with SmartControl® CAT5.

  • Wired OSD Remote Control for SmartControl® CAT5 Cameras - EX1600ACRK

    Sku: EXCO201

    Wired OSD Controller for SmartControl® CAT5 Cameras. Works with EX1600ACRK SmartControl® CAT5 Decoder. Now you can make all of your OSD adjustments from the head end on the DVR main monitor. Another exclusive feature, only from Innotech!

  • 4 Channel SmartControl® CAT5 PTZ Decoder

    Sku: EX400HP

    We took our patent pending SmartControl® CAT5 technology and created the first true plug-and-play CAT5 PTZ analog camera system in the industry. Our EX400HP  SmartControl® CAT5 PTZ decoders provide video, power, OSD and even PTZ control to our SmartControl® CAT5 PTZ cameras, all over a single standard CAT5 cable - up to 500 ft. - and it works with any DVR or any Hybrid DVR.

  • PTZ Joystick / Controller with Touchpad

    Sku: EXCO610

    Innotech's 3 Axis Proportional Joystick with Touchpad controls up to 255 PTZ cameras as well as DVR control and video playback.

  • 12 VDC Camera Power Supply 1 Channel

    Sku: EX12V

    Single channel 12 VDC 1A switching power supply. UL Listed.

  • 12 VDC Camera Power Supply 4 Channels

    Sku: EX12V4

    12 VDC 4 Channel Power Supply. Rated at 4 Amps (1 Amp / Channel), this compact power supply will provide power for up to (4) 12 VDC cameras. UL listed.

  • 12VDC Camera Power Supply 18 Channels

    Sku: EX12V18

    12 VDC 18 Channel Power Supply. Rated at 10 Amps, this power supply will provide power for up to (18) 12 VDC cameras. Each output is individually fused with auto-reset.

  • 24VAC Plug-In Power Supply 1 Channel

    Sku: EX24V

    24VAC single channel plug-in power supply. Rated at 40VA (1.66W), UL listed.